Allied Telesis AT-S97 - Manual (Page 90)

Chapter 5: Port and Module Commands
90
SYSTEM SHOW INTERFACE
Syntax - Chassis Only
system show interface id= chassis
Syntax - Chassis and Slot
system show interface id= chassis / slot
Syntax - Chassis, Slot and Channel
system show interface id= chassis / slot / channel
Parameters
id Specifies the chassis, slot or channel to display. The
command can display only one device at a time. The ID
consists of the following parts:
chassis Specifies the ID number of the chassis. In
version 1.3.0, the chassis ID number is 0 or 31.
slot Specifies the slot number of the media converter
module with the port. Possible values are:
1 or 2 Specifies a slot number of a media
converter slot. In the AT-MCF2000
Chassis, the left slot is 1 and the
right slot is 2.
channel Specifies the number of a channel on the
AT-MCF2012LC and AT-MCF2012LC/1
Modules. You can specify only one channel at a
time. Possible values are:
1 to 12 Specifies a channel. Channel 1
consists of twisted pair port 1 and
fiber topic port 1, channel 2 of twisted
pair port 2 and fiber topic port 2, and
so on.
To view the ID and slot numbers of a chassis, refer to
“SYSTEM SHOW CLUSTER” on page 88 or “SYSTEM
SHOW CHASSIS” on page 86.
Privilege Levels
Administrator, read-write, and read-only.