Allied Telesis AT-S97 - Manual (Page 160)

Chapter 9: File System Commands
160
support stacking, you can still
use the asterisk as a wildcard
to designate the chassis.
0 or 31 In version 1.3.0, the chassis ID
numbers are limited to these
values.
slot Identifies the slot number of a module.
Possible values are:
* (asterisk) Indicates all slots in a chassis.
m Identifies the management
module slot.
1 or 2 Specifies a slot number of a
media converter module. In the
AT-MCF2000 Chassis, the left
slot is 1 and the right slot is 2.
bootblock Designates the area of flash memory
reserved for the AT-S85 and AT-S97 boot
loader files.
appblock Designates the area of flash memory
reserved for the AT-S85 and AT-S97
Management Software.
filename.cfg Downloads a master configuration file from
the TFTP server to the file system of the
management module. This parameter
designates a name for the file when the file
is stored in the file system on the module.
The name can be up to 15 alphanumeric
characters, not including the extension.
Enclose the filename in double quotes if it
contains a space. The filename must include
the “.CFG” extension.
To view the ID and slot numbers of a chassis, refer to
“SYSTEM SHOW CHASSIS” on page 86 or “SYSTEM
SHOW CLUSTER” on page 88.
Privilege Levels
Administrator and read-write.