Allied Telesis AT-S97 - Manual (Page 136)

Chapter 8: Configuration File Commands
136
NTP Configuration
This section controls the NTP client for setting the modules date and time
from an NTP server on your network or the Internet.
Figure 24. NTP Configuration Section
This section accepts the following commands:
ˆ “NTP DISABLE” on page 104
ˆ “NTP ENABLE” on page 105
ˆ “NTP SET” on page 106
Telnet and SSH Configuration
This section controls the Telnet and SSH servers for remote management
of the chassis from a Telnet or SSH client.
Figure 25. Telnet and SSH Configuration Section
This section accepts the following commands:
ˆ “TELNET DISABLE” on page 178
ˆ “TELNET ENABLE” on page 179
ˆ “SSH DISABLE” on page 184
ˆ “SSH ENABLE” on page 185
User Configuration
This section controls the manager accounts.
Figure 26. User Configuration Section
### Ntp Configuration
ntp set server=0.0.0.0
ntp disable
### Telnet & SSH Configuration
telnet disable
ssh disable
### User Configuration
user config name=manager priv=admin pwd=3af00c6cad11f7ab5db4467b66ce503eff