Allied Telesis AT-S97 - Manual (Page 185)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
185
SSH ENABLE
Syntax
ssh enable
Parameters
None.
Privilege Levels
Administrator and read-write
Description
This command activates the SSH server on the management module for
remote management with the SSH application protocol. The default setting
for the SSH server is disabled.
Note
Refer to “SSH Server Guidelines” on page 182 for the requirements
of remote SSH management. For instructions on how to start a
management session, refer to “Starting a Remote Telnet or Secure
Shell Management Session” on page 22.
Example
ssh enable