Allied Telesis AT-S97 - Manual (Page 59)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
59
SYSTEM SHOW CONSOLE
Syntax
system show console
Parameters
None.
Privilege Levels
Administrator, read-write, and read-only.
Description
This command displays the setting for the console timer. This parameter
controls the amount of time in minutes that the management software
waits before automatically ending an inactive local or remote management
session. The management software automatically logs off the session if
the console timer expires without any management activity. This security
feature can prevent unauthorized individuals from using your management
station to change the configuration of the media converter chassis should
you step away from your system during a management session.
A value of 0 (zero) disables the console timer. Inactive management
sessions are never timed out. This value should be used with caution. If
you disable the console timer, you must always remember to log off after
every local or remote management session of the media converter, or
future management session may be blocked.
To set the console timer setting, refer to “SYSTEM SET CONSOLE” on
page 53.
Example
system show console