Allied Telesis AT-S97 - Manual (Page 116)

Chapter 7: Event Log and Syslog Client Commands
116
LOGGING ENABLE SYSLOG
Syntax
logging enable syslog
Parameters
None.
Privilege Levels
Administrator and read-write
Description
This command activates the syslog client on the management module.
The module immediately begins to send to the syslog server the event
messages generated by the modules in the chassis. The default setting for
the syslog client is disabled. The IP address of the syslog server is
specified with “LOGGING SET EVENTLOG” on page 117. To display the
current status of the syslog client, refer to “LOGGING SHOW” on
page 120.
Note
For the requirements of the syslog client, refer to “Syslog Client
Guidelines” on page 110,
Example
logging enable syslog