Allied Telesis AT-S97 - Manual (Page 163)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
163
Note
A management module resets after receiving a new version of the
AT-S97 Management Software. It will be unresponsive to
commands for approximately one minute while it initializes the new
management software.
Note
A media converter module resets after receiving a new version of
the AT-S85 Management Software, but immediately resumes
forwarding network traffic through its ports and channels using its
default settings while it initializes the new software, a process that
takes approximately one minute to complete. The module will be
unresponsive to management commands during the initialization
process. At the completion of the process, the module configures its
ports and channels according to the settings in the active master
configuration file on the management module.
Description of Syntax 3
This command syntax downloads a master configuration file from a TFTP
server to the file system of a management module. You might use this
command after editing a configuration file at your workstation or when
transferring a master configuration file from another chassis.
If, after downloading a new or edited master configuration file onto a
management module, you want to configure the modules using the file,
there are several additional commands you have to perform. First, you
must designate the file as the active configuration file for the management
module with the CONFIG SET command. Second, you must issue the
CONFIG RUN command so that the modules configure themselves
according to the commands in the file. For information, refer to Chapter 8,
“Configuration File Commands” on page 129.
Description of Syntax 4
This syntax is reserved for future versions of the management software.
Examples of Downloading the AT-S85 and AT-S97 Boot Loaders
This command downloads a new version of the AT-S85 boot loader onto
all the media converter modules in a chassis. The IP address of the TFTP
server is 150.24.44.65 and the name of the file on the TFTP server is
“ats85.bin”:
file download srcfile=tftp://150.24.44.65/ats85.bin
dstfile=system://*/*/bootblock