Allied Telesis AT-S97 - Manual (Page 140)

Chapter 8: Configuration File Commands
140
Command
Summary
Table 12 summarizes the configuration file commands.
Table 12. Configuration File Commands
Command Description
“CONFIG RUN” on page 141 Configures the parameter settings
on all the modules using the active
master configuration file on the
management module
CONFIG SAVE on page 142 Updates the active configuration
file with the latest changes to the
parameter settings. Also creates
new master configuration files.
“CONFIG SAVE
FILESYSTEM” on page 143 Creates a new master
configuration file.
CONFIG SET on page 145 Selects a new active master
configuration file.
CONFIG SHOW on page 147 Displays the name of the active
and current master configuration
files on the management module.