Allied Telesis AT-S97 - Manual (Page 62)

Chapter 5: Port and Module Commands
62
Overview
The system commands are divided into two groups in this manual. The
first group of commands, described in Chapter 4, “General System
Commands” on page 47, display and control the basic parameters on the
management module, such as the chassis’ name and the date and time.
The system commands described in this chapter control the parameters
on the ports and channels on the media converter modules. Functions
include setting port speed and duplex mode, resetting media converter
modules, and displaying status information on the modules of a chassis.
Command
Summary
Table 3 summarizes the port and module configuration commands.
Table 3. Port and Module Commands
Command Description
“SYSTEM RESET CHASSIS”
on page 64 Performs a soft reset on the
management module and media
converter modules in a chassis by
initializing the AT-S85 and AT-S97
Management Software.
“SYSTEM RESET CLUSTER”
on page 66 Returns the parameter settings on
the management module and
media converter modules in the
chassis or stack to the default
values.
“SYSTEM RESET MODULE”
on page 68 Performs a soft reset on individual
modules in a chassis by initializing
the module’s AT-S85 or AT-S97
Management Software.
“SYSTEM SET INTERFACE”
on page 71 Sets the operating mode of the
channels on a media converter
module.
“SYSTEM SET MODULE” on
page 77 Assigns a name and temperature
threshold to a module.
“SYSTEM SET PORT” on
page 80 Configures the parameter settings
of the ports in a media converter
channel.