Allied Telesis AT-S97 - Manual (Page 87)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
87
The columns are defined here:
ˆ Chassis ID - The identification number of the chassis. For information,
refer to “Chassis ID Numbers” on page 18.
ˆ Chassis Name - The name of the chassis, set with the SYSTEM SET
CHASSIS command. For information, refer to “SYSTEM SET
CHASSIS” on page 51.
ˆ Chassis Type - The chassis’ model name.
ˆ MAC Address - The chassis’ MAC address.
ˆ Master Chassis - Whether the chassis is the master chassis of a stack.
To be the master chassis of a stack, the status of the chassis’
management module must be set to active. Possible status are:
– Yes: The status of the management module in the
chassis is active, making it the master chassis of the
stack.
– No: The chassis has a stacking module.
ˆ Slot ID: A slot in the chassis. Possible values are:
– M: The management slot, used for the AT-MCF2000M
Management Module and the AT-MCF2000S Stacking
Module.
– number: A media converter slot number (e.g. 1, 2, etc.).
An empty slot is not included in the table.
ˆ Module Name: The name of the module, set with the“SYSTEM SET
MODULE” on page 77.
ˆ Module Type - The module’s model name.
ˆ Software Version - The version number of the module’s AT-S85 or
AT-S97 Management Software.
Example
This command displays information about a chassis with the ID number 0:
system show chassis id=0