Allied Telesis AT-S97 - Manual (Page 122)

Chapter 7: Event Log and Syslog Client Commands
122
LOGGING SHOW EVENTLOG
Syntax
logging show eventlog
Parameters
None.
Privilege Levels
Administrator, read-write, and read-only
Description
This command displays the event messages in the event log. An example
is shown in Figure 18. The events are displayed in reverse-chronology,
with the newest entries listed first. The event log, in its default setting,
displays all of its messages. To limit the display, set the event log’s
severity level with the LOGGING SET EVENTLOG command. For
information, refer to “LOGGING SET EVENTLOG” on page 117.
Figure 18. LOGGING SHOW EVENT-LOG Command
The fields are defined here:
ˆ Date - The date of the event.
ˆ Time - The time of the event.
ˆ Status - The event status, consisting of the severity level and the
message’s classification. The possible severity levels are listed in
Table 9.
Date Time Status Message
----------------------------------------------------------------
04/21/2007
2:12:28::MN::RP::02/1::Port 7 Set to Missing Link
04/21/2007 2:12:26::MN::RP::01/1::Fiber Port 7 Online
04/21/2007 2:12:25::MN::RP::01/1::Copper Port 7 Online
04/21/2007 2:12:24::MN::RP::00/2::Fiber Port 5 Online
04/21/2007 2:12:24::MN::RP::00/2::Copper Port 5 Online
04/21/2007 2:12:22::EV::RP::00/M::SSH Server Enabled