Allied Telesis AT-S97 - Manual (Page 42)

Chapter 3: IP Configuration Commands
42
IP DHCP DISABLE
Syntax
ip dhcp disable
Parameters
None.
Privilege Levels
Administrator and read-write.
Description
This command deactivates the DHCP and BOOTP clients on the
management module. When the clients are deactivated, the module’s IP
configuration immediately returns to the default values. The default setting
for the DHCP and BOOTP clients is disabled.
To manually assign an IP configuration to the management module, refer
to “IP SET” on page 44.
Example
ip dhcp disable