Allied Telesis AT-S97 User Manual
Page 174
Chapter 9: File System Commands
174
Description of Syntax 2
This command syntax is reserved for future versions of the management
software.
Examples of Uploading a Configuration File to a TFTP Server
This command uploads the master configuration file “traffic_n2.cfg” from a
management module to a TFTP server with the IP address of
150.24.44.65. The chassis has the ID number 0:
file upload srcfile=system://0/m/traffic_n2.cfg
dstfile=tftp://150.24.44.65/traffic_n2.cfg
This command uploads the master configuration file “mic traf ata.cfg” from
the management module of a chassis with the ID number 31. The IP
address of the server is 149.72.23.5 and the name of the file is changed to
“mic traf bc.cfg on the TFTP server:
file upload srcfile=system://31/m/"mic traf ata.cfg"
dstfile=tftp://149.72.23.5/”mic traf bc.cfg”
Note
The following example shows how to upload an auxiliary
configuration file from a media converter module. This function
should never be necessary.
This command uploads the auxiliary configuration file “BM.cfg” from a
media converter module in slot 1 of a chassis with the ID number 0:
file upload srcfile=system://0/1/BM.cfg
dstfile=tftp://150.24.44.65/BM.cfg