Allied Telesis AT-S97 - Manual (Page 124)

Chapter 7: Event Log and Syslog Client Commands
124
Chassis and Slot IDs - The chassis ID and slot identifier of the source
module of the message. The first number is the chassis ID number
and the second is the slot number or letter, as shown in Figure 19.
Figure 19. Chassis and Slot IDs
For background information on chassis ID numbers, refer to “Chassis
ID Numbers” on page 18. For the slot identifiers, refer to Table 10.
The event messages are listed in Table 11.
Table 10. Slot Identifiers
Identifier Slot
1, 2, ... Media converter slot.
A or B Power supply or fan module slot.
M Management module slot.
00/2
Chassis ID
Slot Identifier
Table 11. Event Messages
Message Definition Classification
Critical Level Messages
Battery Low The power charge in a module’s battery is
low. The battery may need replacing. Report
The charge in the module’s battery returned
to normal or the battery was replaced. Clear
Power Failure The input voltage of a power supply module
dropped below or exceeded the permitted
operating range. Report
The input voltage of a power supply module
returned to the proper operating range. Clear