Allied Telesis AT-S97 - Manual (Page 159)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
159
FILE DOWNLOAD
Syntax 1: Downloading the AT-S85 and AT-S97 Boot Loaders
file download srcfile=tftp:// ipaddress / filename .bin
dstfile=system:// chassis / slot /bootblock
Syntax 2: Downloading the AT-S85 and AT-S97 Management
Software (Image Files)
file download srcfile=tftp:// ipaddress / filename .img
dstfile=system:// chassis / slot /appblock
Syntax 3: Downloading a Master Configuration File
file download srcfile=tftp:// ipaddress / filename .cfg
dstfile=system:// chassis / slot / filename .cfg
Syntax 4: Downloading a Configuration File from the Management
Module to a Media Converter Module
file download srcfile=system// chassis /m/ filename .cfg
dstfile=system:// chassis / slot / filename .cfg
Parameters
srcfile=tftp Specifies the IP address of the TFTP server and the name
of the file to download to a module. This parameter has the
following parts:
ipaddress Specifies the IP address of the TFTP server.
filename Specifies the name of the file on the TFTP
server to download onto the management
module or media converter module. Enclose
the filename in double quotes if it contains a
space. The filename extension must be
“.BIN” for the boot loader, “.IMG” for the
management software, and “.CFG” for a
configuration file.
dstfile=system
Specifies the destination chassis and module for the file.
This parameter consists of the following parts:
chassis Specifies the ID number of a chassis.
Possible values are:
* (asterisk) Indicates all chassis in a stack.
Though version 1.3.0 does not