Figure 34: file show command – Allied Telesis AT-S97 User Manual

Page 170

Chapter 9: File System Commands

170

Figure 34. FILE SHOW Command

The first four columns can be ignored. The remaining columns are defined
here:

File size - The size of the file in bytes.

Date and Time - The date and time when the file was created or last
modified.

Filename - The name of the file.

This command can also display the contents of a file system on a media
converter module, but you should never need to do that. For information
on configuration files, refer to “Overview” on page 130.

Examples

This command displays all the filenames in the file system on the
management module in a chassis with the ID number 0:

file show filesystem=system://0/m/*.*

This command displays the names of just the configuration files on a
management module in a chassis with the ID number 0:

file show filesystem=system://0/m/*.cfg

This command displays the names of the configuration files starting with
”Ch” on a management module in chassis with the ID number 0:

file show filesystem=system://0/m/Ch*.cfg

This command displays the names of the configuration files on the
management module in a chassis with the ID number 31:

file show filesystem=system://31/m/*.cfg

Module 0/M File System:
-rw-r--r--

2747

Apr 12