Allied Telesis AT-S97 - Manual (Page 135)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
135
parameter for the power supply and fan modules. For further information
on this command, refer to “SYSTEM SET MODULE” on page 77.
IP Configuration
The commands in this section define the IP configuration of the
management module.
Figure 22. IP Configuration Section
This section accepts the following commands:
ˆ “IP DHCP DISABLE” on page 42
ˆ “IP DHCP ENABLE” on page 43
ˆ “IP SET” on page 44
Log Configuration
This section controls the event log and the syslog client.
Figure 23. Log Configuration Section
The section accepts the following commands:
ˆ “LOGGING DISABLE EVENTLOG” on page 113
ˆ “LOGGING DISABLE SYSLOG” on page 114
ˆ “LOGGING ENABLE EVENTLOG” on page 115
ˆ “LOGGING ENABLE SYSLOG” on page 116
ˆ “LOGGING SET EVENTLOG” on page 117
ˆ “LOGGING SET SYSLOG” on page 119
### Ip Configuration
ip dhcp disable
ip set ip-address=192.168.1.2
ip set subnetmask=255.255.255.0
ip set default-gateway=0.0.0.0
### Log Configuration
logging enable eventLog
logging enable sysLog
logging set sysLog host=0.0.0.0
logging set sysLog facility-code=1
logging set eventLog severity-level=event