Allied Telesis AT-S97 - Manual (Page 172)

Chapter 9: File System Commands
172
FILE UPLOAD
Syntax 1: Uploading a Configuration File to a TFTP Server
file upload srcfile=system:// chassis / slot / filename .cfg
dstfile=tftp:// ipaddress / filename .cfg
Syntax 2: Uploading a Configuration File from a Media Converter
Module to the Management Module
file upload srcfile=system:// chassis / slot / filename .cfg
dstfile=system:// chassis /m/ filename. cfg
Parameters
srcfile=system
Specifies the location and name of the file to upload. This
parameter has of the following parts:
chassis Specifies the ID number of the chassis with
the file. In version 1.3.0, the ID number is 0
or 31.
slot Identifies the slot with the module and file.
Possible values are:
m Identifies the management slot
with the AT-MCF2000M
Management Module.
1 or 2 Specifies a slot number of a
media converter module. In the
AT-MCF2000 Chassis, the left
slot is 1 and the right slot is 2.
filename Specifies the name of the file to upload. A
filename with a space must be enclosed in
double quotes. The filename extension must
be “.CFG”. The filename is case sensitive.
To view the ID and slot numbers of the devices in a chassis
or stack, refer to “SYSTEM SHOW CHASSIS” on page 86
or “SYSTEM SHOW CLUSTER” on page 88. To view the
files in a file system, refer to “FILE SHOW” on page 169.