Avaya SMON C360 - Manual (Page 258)

Chapter 20
244 Avaya C360 Manager User Guide
You can modify OSPF Area parameters.
OSPF Link State Database
To display the OSPF Link State Database, select IP Route > OSPF >
OSPF Link State Database . The OSPF Link State Database window opens.
Figure 20-14. OSPF Link State Database Window
Area Border Routers
Count The total number of Area Border Routers
reachable within this area. This number is
initially zero and is calculated in each OSPF
pass.
AS Border Routers
Count The total number of Autonomous System
border routers reachable within this area. This
number is initially zero and is calculated with
each SPF pass.
Area LSAs Count The number of link-state advertisements in the
link-state database.
Area LS Checksum
Summary The sum of LS checksums of LS advertisements
contained in the LS database. Use this sum to
determine if there has been a change in a
router's LS database, and to compare the LS
database of two routers.
Table 20-11. OSPF Area Parameters (Continued)
Field Description