Avaya SMON C360 - Manual (Page 195)

Avaya C360 Manager User Guide 181
IP Multicast Filtering
The following table provides a list of the fields in the IP Multicast Filtering
dialog box and their descriptions:
To change the IP Multicast filtering configuration for the Avaya C360
Device, change the IP Multicast filtering parameters.
To apply the changes, click Apply .
To refresh the information in the IP Multicast Filtering dialog box, click
Refresh .
Table 13-1. IP Multicast Filtering Parameters
Field Description
Filtering Mode The mode of operation of the IP Multicast
Filtering on the device. Possible Modes are:
• Enable - IP Multicast Filtering is enabled
on the device.
• Disable - IP Multicast Filtering in not
enabled on the device.
Host Aging Time The amount of time (in seconds) allowed to
pass from a router’s last IP Multicast request
before the device stops forwarding all multicast
sessions to a router. The valid range for this
parameter is 30 - 7200 seconds.
Router Aging Time The amount of time (in seconds) allowed to
pass from a remote router’s last IP Multicast
request before the local router’s multicast
routing table stops forwarding all multicast
sessions to the remote router. The valid range
for this parameter is 30 - 7200 seconds.
Delay Time The amount of time (in seconds) the device
waits from receiving a request for a new IP
Multicast session until IP Multicast filtering
begins. This time allows other hosts to report to
the device. The valid range for this parameter is
1 - 300 seconds.