Channel group - frame relay information – Avaya SMON C360 User Manual
Page 104
Chapter 7
90
Avaya C360 Manager User Guide
Channel Group - Frame Relay Information
The Channel Group dialog box for Channel Groups using frame relay
contains five tabs:
•
- Basic information about the Channel Group.
For information on the fields in the Channel Group tab of the
Channel Group - Frame Relay dialog box, refer to
Operational Status
The operational status of the PPP interface.
Possible statuses include:
• Up - The interface is up and can transmit
and receive packets.
• Down - The interface is down due to
some failure, and cannot transmit or
receive packets.
• Testing - The interface is in testing mode
and cannot transmit or receive regular
data.
• Standby - The interface is a backup
interface and cannot transmit or receive
packets unless the primary interface it
backs up fails.
• Disabled - The interface is disabled. It
cannot transmit or receive packets.
• Partially Down - The interface is up.
However, some interfaces (or PVCs)
layered on top of this interface are Down.
Some packets can be transmitted and
received.
IPCP Status
IP Control Protocol. The state of IPCP for this
PPP session. IP packets can only be
transmitted and received over the PPP session
when the IPCP status is Open. Possible
statuses include:
• Open
• Not-Opened
Table 7-3. Channel Group Dialog Box - PPP Parameters (Continued)
Field
Description