Avaya SMON C360 - Manual (Page 124)

Chapter 7
110 Avaya C360 Manager User Guide
DSR The port’s Data Set Ready status. Possible values
are:
• Up - The port’s data set has successfully
been prepared. This process takes place
during initial line signalling.
• Down - The port’s data set has either
failed preparation or has completed the
preparation process.
DTR The port’s Data Terminal Ready status. Possible
values are:
• Up - The port is physically prepared to
transmit and receive packets.
• Down - The port is not physically
prepared to transmit and receive packets.
This generally indicates an error condition
on the circuit.
RTS The port’s Ready To Send status. Possible values
are:
• Up - The port is logically prepared to
transmit and receive packets.
• Down - The port is not logically prepared
to transmit and receive packets. This
generally indicates an error condition
either on the device or the circuit.
CTS The port’s Clear To Send status. Possible values
are:
• Up - The port has successfully completed
initial line signalling. CTS takes place at the
end of the initial line signalling process and
last for a short period of time.
• Down - The port has either failed to
complete initial line signalling or the initial
line signalling process has been completed.
Invert Tx Clock The state of the Tx clock. Possible states are:
• On - The Tx clock is inverted.
• Off - The Tx clock is not inverted.
Table 7-9. USP Configuration - Advanced Parameters (Continued)
Field Description