Avaya SMON C360 - Manual (Page 129)

Avaya C360 Manager User Guide 115
WAN Configuration
2. Click Frame Relay . The Frame Relay tab of the USP dialog box
appears.
Figure 7-18. USP Dialog Box - Frame Relay Tab
The following table provides a list of the fields in the Frame Relay tab of
the USP dialog box and their descriptions:
Table 7-11. USP Dialog Box - Frame Relay Parameters
Field Description
LMI Type Local Management Interface Type. The Data
Link Connection Management scheme used
by the frame relay interface. Possible values
are:
• ANSI
• q933a
• lmi-rev1
• Disable
LMI Auto Sense The state of Local Management Interface
Auto-Sensing on the interface. Possible states
include:
• Enable - The LMI type is received from
the interface at the other end of the line.
• Disable - The LMI Type is determined by
the value in the LMI Type field.