Avaya SMON C360 - Manual (Page 246)

Chapter 20
232 Avaya C360 Manager User Guide
DHCP/BOOTP Parameters
To display and update DHCP/BOOTP parameters, select IP Route > DHCP >
DHCP/BOOTP Parameters . The DHCP/BOOTP Parameters window opens.
Figure 20-8. DHCP/BOOTP Parameters Window
The following parameters are displayed:
Table 20-6. DHCP/BOOTP Parameters
Field Description
VLAN Name
(not for X330WAN)
The interface name upon which the clients are
located.
L2 Interface Name
(X330WAN router
only)
The interface name upon which the clients are
located.
Server1 Address The IP address of the first of two possible DHCP
servers for the interface.
Server2 Address The IP address of the second of two possible
DHCP servers for the interface.