Avaya SMON C360 - Manual (Page 114)

Chapter 7
100 Avaya C360 Manager User Guide
Each row of the Channel Groups table represents a valid Channel Group.
The following table provides a list of the fields in the Channel Groups
table and their descriptions:
Table 7-7. Channel Groups Table Parameters
Field Description
Module The number of the module in which the
Channel Group exists.
Channel-Group The name of the Channel Group.
Bandwidth The bandwidth of the Channel Group.
Encapsulation The Channel Group’s encapsulation. Possible
values are:
• PPP
• FrameRelay
Status The status of the PPP or Frame Relay
interface. Possible values are:
• Up - The interface is up and can transmit
and receive packets.
• Down - The interface is down due to
some failure, and cannot transmit or
receive packets.
• Testing - The interface is in testing mode
and cannot transmit or receive regular
data.
• Standby - The interface is a backup
interface and cannot transmit or receive
packets unless the primary interface it
backs up fails.
• Disabled - The interface is disabled. It
cannot transmit or receive packets.
• Partially Down - The interface is up.
However, some interfaces (or PVCs)
layered on top of this interface are Down.
Some packets can be transmitted and
received.