Avaya SMON C360 User Manual
Page 204
Chapter 14
190
Avaya C360 Manager User Guide
To enable RTP QoS Fault traps on the Media Gateway module, check the
Enable RTP QoS Fault traps
checkbox. To disable frame relay traps on the
Media Gateway module, uncheck the
Enable RTP QoS Fault traps
checkbox.
The following table provides a list of trap types, their associated icons, and
their descriptions.
For information on adding and removing trap managers and editing their
trap reporting statuses, refer to
“Editing the Trap Managers Table” on
Table 14-3. Media Gateway Trap Types
Icon
Trap
Description
Trap Enable
Enables trap reporting for the selected
manager.
Power Supply Traps
The trap reports the failure of a PSU.
Fan Traps
The trap reports the failure of a fan.
Fault Traps
A group of traps that report a fault in
the device.
Module Insert
Remove Traps
The trap reports the insertion or
removal of a module in the device.
Configuration
Changed Traps
A group of traps that report a change in
the configuration of the device.
Voice Fault Traps
A group of traps that report quality of
service problems with the voice
hardware.
Voice Information
Traps
A group of traps that report on the
normal operation of the Media
Gateway.