Avaya SMON C360 - Manual (Page 132)

Chapter 7
118 Avaya C360 Manager User Guide
2. Enter the parameters for the Frame Relay sub-interface using the
fields at the bottom of the dialog box.
3. Click Apply . The Frame Relay sub-interface is created.
To modify the parameters of a Frame Relay sub-interface:
1. Click the Frame Relay sub-interface you want to modify. The
configuration parameters of the selected sub-interface appear in
the bottom of the dialog box.
2. Modify the parameters you want to change using the fields at the
bottom of the dialog box.
3. Click Apply . The Frame Relay sub-interface parameters are
modified.
To delete a Frame Relay sub-interface:
1. Click the Frame Relay sub-interface you want to delete.
* Note: You can only delete Frame Relay sub-interfaces on which no
IP interfaces are defined.
2. Click Delete . A confirmation dialog box opens.
3. Click Yes .
4. Click Apply . The Sub-Frame-Relay interface is deleted.
The following table provides a list of the fields in the Sub-Interfaces tab of
the USP dialog box and their descriptions:
Table 7-12. USP Dialog Box - Sub-Interfaces Parameters
Field Description
Name The name of the Sub-Frame-Relay interface.
Description A user defined description of the
Sub-Frame-Relay.
Type The type of Frame Relay sub-interface.
Currently, only Point-to-Point interfaces are
supported.
Bandwidth The bandwidth of the Sub-Frame-Relay
interface in bits per second.