Avaya SMON C360 User Manual

Page 106

Chapter 7

Avaya C360 Manager User Guide

The following table provides a list of the fields in the Frame Relay tab of
the Channel Group dialog box and their descriptions:

Table 7-4. Channel Group Dialog Box -

Frame Relay Parameters

Field

Description

LMI Type

Local Management Interface Type. The Data
Link Connection Management scheme used
by the frame relay interface. Possible values
are:

• ANSI

• q933a

• lmi-rev1

• Disable

LMI AutoSense

Local Management Interface Auto-Sensing is
a method for automatically determining the
LMI Type for the interface. Possible values are:

• Enable

• Disable

Operational Status

The operational status of the interface.
Possible statuses include:

• Up - The interface is up and can transmit

and receive packets.

• Down - The interface is down due to

some failure, and cannot transmit or
receive packets.

• Testing - The interface is in testing mode

and cannot transmit or receive regular
data.

• Standby - The interface is a backup

interface and cannot transmit or receive
packets unless the primary interface it
backs up fails.

• Disabled - The interface is disabled. It

cannot transmit or receive packets.

• Partially Down - The interface is up.

However, some interfaces (or PVCs)
layered on top of this interface are Down.
Some packets can be transmitted and
received.