NORD Drivesystems BU0300 - Manual (Page 71)

5 NORD CON software
BU 0300 EN Subject to technical alterations 71
Oscilloscope function
The function to be recorded can be selected from
various channel settings. A total of 4 channels are
available and are scalable in both time and value
range.
The curves can be saved and archived with the
respective settings and called up at a later time.
Parameterisation
All the connected frequency inverter
parameters can be read, edited, saved or
printed for documentation with NORD CON.
All frequency inverter parameters can be
easily accessed via the parameter name and
the corresponding parameter number. This
means that parameterisation with the PC
software NORD CON is very transparent and
therefore operation is much easier.
In addition, the parameter characteristics are
available and it is possible to narrow down the
displayed parameters.
Macros
Macros enable simple process flows to be
created for test purposes. This can be very
useful, for instance, for testing during
commissioning of a frequency inverter.
Bsp. Parameterauswahl