NORD Drivesystems BU0300 - Manual (Page 113)

7.10 Information
BU 0300 EN Subject to technical alterations 113
Parameter Setting value / Description / Note
Supervisor
Parameter
set
Available with option
P736 DC Link voltage
S
Always available
0 ... 1000 V DC Displays the actual link voltage.
P739 Temperature heat sink
S
Always available
0 … XX°C Displays the actual FI heat sink temperature.
0 = Low range
9999 = High range (20 … 100°C)
P740
... -01
…
... -05
Process data Bus In
S
Always available
0000 ... FFFF
(hex) This parameter informs
about the actual control word
and the setpoints that are
transferred via the bus
systems.
... -01 = Control word (source from P509)
... -02 = Setpoint 1 (P546)
... -03 = Setpoint 2 (P547)
... -04 = Setpoint 3 (P548)
... -05 = Bus IO In Bits (P480)
P741
... -01
…
... -05
Process data Bus Out
S
Always available
0000...FFFF (hex) This parameter informs
about the actual status word
and the actual values that
are transferred via the bus
systems.
... -01 = Status word
... -02 = Istwert 1 (P543)
... -03 = Actual value 2 (P544)
... -04 = Actual value 3 (P545)
… -05 = Bus IO Out Bits (P481)
P742 Database version
S
Always available
0 ... 9999 Displays the internal database version of the FI.
P743 Inverter ID
Always available
0.00 ... 250.00 kW Displays the inverter power in kW, e.g. "1.50" ⇒ FI with 1.5 kW nominal power.
P744 Configuration
Always available
0 ... 2 This parameter displays the option modules integrated by the FI.
0 = No customer unit
1 = Basic I/O
2 = Standard I/O
P745 Option version
S
Always available
0 ... 32767 Design status of the integrated options (only when own processor is present).