NORD Drivesystems BU0300 - Manual (Page 15)

2 Assembly and installation
BU 0300 EN Subject to technical alterations 15
2.3.2 Adapter unit SK TI 0/2
(SK TI 0/2, Part. No. 275115020)
(SK TI 0/2-C, Part. No. 275175020)
The adapter units SK TI 0/2 and SK TI 0/2-C have 2 mounting flanges on the sides to which various adapter
plates with different types of cable glands or motor connectors can be mounted. The standard design always
has 2 x M12 screw connections and an adapter plate with the following screw connections on the one side:
2 screw connections M20 (e.g. supply voltage)
1 screw connection M16 (for connection socket M12 of the ParameterBox SK PAR-2H)
The adapter plate with the screw connections is located at III in the standard design.
Cable for motor
U-V-W connection
Cable for motor PTC
Cast enclosure CIU - customer interface unit M12 socket
Screw accessories
ATTENTION
The adapter unit SK TI 0/2 is available for the protection class IP55 and the adapter unit SK TI
0/2-C for IP66. Otherwise, the functionality and dimensions of both adapter units are identical.
However special measures (see Chap. 1.7) are implemented in the IP66 version to maintain this
protection class.