NORD Drivesystems BU0300 - Manual (Page 61)

4.4 Functions of the ParameterBox
BU 0300 EN Subject to technical alterations 61
Parameterising with the ParameterBox
To enter the parameterisation mode, the menu group >Parameterisation< must be selected in the menu level
1. Pressing the ENTER key (
) opens the parameter level of the connected frequency inverter. The
following graphic shows how the control elements of the ParameterBox are used for the parameterisation of a
frequency inverter.
Simultaneous operation
→ Load factory settings
of parameter
One menu level forward
or
Accept parameter value
Reduce value
Selection forward Increase value
Selection back
Simultaneous operation
→ one menu level back