NORD Drivesystems BU0300 - Manual (Page 108)

NORDAC trio SK 300E Manual
108 Subject to technical alterations BU 0300 EN
Parameter Setting value / Description / Note
Supervisor
Parameter
set
Available with option
P543 Actual bus value 1
S P
Always available
0 ... 12
[ 1 ] The return value 1 can be selected for bus actuation in this parameter.
NOTE: Further details can be found in the respective BUS instruction manuals.
0 = Off
1 = Actual frequency
2 = Actual speed
3 = Current
4 = Torque current
5 = Status of digital IO & relays
6 = Reserved 7 = Reserved
8 = Nominal frequency
9 = Fault number
10 = Reserved
11 = Reserved
12 = Bus IO Out Bits 0-7
P544 Actual bus value 2
S P
Always available
0 ... 12
[ 0 ]
The return value 2 can be selected for bus actuation in this parameter.
NOTE: Further details can be found in the respective BUS instruction manuals.
0 = Off
1 = Actual frequency
2 = Actual speed
3 = Current
4 = Torque current
5 = Status of digital IO & relays
6 = Reserved 7 = Reserved
8 = Nominal frequency
9 = Fault number
10 = Reserved
11 = Reserved
12 = Bus IO Out Bits 0-7
P545 Actual bus value 3
S P
Always available
0 ... 12
[ 0 ]
The return value 3 can be selected for bus actuation in this parameter. This is only available if P546
is
≠ 3.
NOTE: Further details can be found in the respective BUS instruction manuals.
0 = Off
1 = Actual frequency
2 = Actual speed
3 = Current
4 = Torque current
5 = Status of digital IO & relays
6 = Reserved 7 = Reserved
8 = Nominal frequency
9 = Fault number
10 = Reserved
11 = Reserved
12 = Bus IO Out Bits 0-7
P546 Function Bus setpoint 1
S P
Always available
0 ... 7
[ 1 ]
In this parameter, a function is allocated to the supplied setpoint 1 during bus actuation.
NOTE: Further details can be found in the respective BUS instruction manuals.
0 = Off
1 = Setpoint frequency (16 Bit)
2-6 = Reserved
7 = Bus IO In Bits 0-7