NORD Drivesystems BU0300 User Manual

Page 51

4 Operation and display

BU 0300 EN

Subject to technical alterations

4 Operation and display

There are various solutions for operating the SK 300E, dependent upon application. When used on site at the
device, the Handheld Variant of the ParameterBox can be connected directly via an M12 connector. As well
as control and parameterisation of the frequency inverter, this also enables operating values to be displayed
and datasets to be saved (see also Chap. 4.2‚ ParameterBox, Handheld variant).

For permanent fixed installation in a control panel, the ParameterBox is also available as an Installation Variant.
The functionality is equivalent to that of the handheld type (see also Chap. 4.3 ParameterBox (Installation
variant)).

All NORDAC frequency inverters can be controlled and parameterised using the free NORD CON software. In
conjunction with a laptop or PC, this provides diagnosis tools for simple drive optimisation. Parameter sets and
oscillograms can be saved, edited and archived. Further information can be found in Chap. 5 "NORD CON
software".

Æ Website for downloading NORD CON: >