NORD Drivesystems BU0300 User Manual
Page 58
NORDAC trio SK 300E Manual
58
Subject to technical alterations
BU 0300 EN
Operation
LCD
Display
Graphic-capable, backlit LCD display for displaying operational values and parameters for the
connected frequency inverter(s) and ParameterBox parameters.
Use the Selection keys to move through the menu levels and within the individual menu items.
Press the
and
keys together to go back one level.
The contents of individual parameters can be altered with the VALUES keys.
Press the
and
keys together to load the factory settings of the parameter selected.
When controlling the frequency inverter using the keyboard, the frequency setpoint is set using the
VALUE keys
.
Press the ENTER key to select a menu group or accept the changed menu items or parameter values.
Note:
If a parameter is exited without a new value being stored, then one of the SELECTION keys
can be used for this purpose.
If the inverter is to be controlled directly from the keyboard (not control terminals), then the actual
setpoint frequency can be stored under the Jog Frequency parameter (P113).
START key
for switching on the frequency inverter.
Note:
Can only be used if this function
has not been blocked in parameter P509
or P540.
STOP key
for switching off the frequency inverter.
The rotational direction of the motor is switched by
pressing the Direction key. Rotation direction left is
indicated by a minus sign.
Attention!
Take care when operating pumps, screw
conveyors, ventilators, etc.
ON
ERROR
The LED's signal the actual status of the ParameterBox.
ON
(green)
The ParameterBox is connected to the supply voltage and is operational.
ERROR
(red) An error has occurred while processing data or in the connected frequency inverter.