NORD Drivesystems BU0300 - Manual (Page 143)

12.4 Maintenance and servicing information
BU 0300 EN Subject to technical alterations 143
12.4 Maintenance and servicing information
NORDAC trio SK 300E frequency inverters are maintenance-free when used correctly. Please note the
"General data" in Chap. 9.1 .
If the frequency inverter is being used in a dusty environment, then the cooling-vane surfaces should be
regularly cleaned with compressed air. Always ensure that the surface of the entire frequency inverter is free of
coarse contamination and not covered by anything so that heat can be dissipated properly.
If you contact our technical support, please have the precise device type (rating plate/display), accessories
and/or options, the software version used (P707) and the series number (rating plate) at hand.
Repairs
The device must be sent to the following address if it needs repairing:
NORD Electronic DRIVESYSTEMS GmbH
Tjüchkampstraße 37
26605 Aurich, Germany
For queries about repairs, please contact:
Getriebebau NORD GmbH & Co. KG
Telephone: 0049 / 4532 / 401-515
Fax: 0049 / 4532 / 401-555
If a frequency inverter is sent in for repair, no liability can be accepted for any added components, e.g. such as
mains cables, potentiometer, external displays, etc.!
Please remove all non-original parts from the frequency inverter.
Internet information
You can also find the comprehensive manual in various languages, including German, English, French and
Spanish on our Internet site.
HT
www.nord.com
TH
You can also obtain this manual from your local representative if necessary.