NORD Drivesystems BU0300 - Manual (Page 70)

NORDAC trio SK 300E Manual
70 Subject to technical alterations BU 0300 EN
5 NORD CON software
5.1 General information
NORD CON
is a PC program to control and parameterise
frequency inverters manufactured by Getriebebau NORD. The
software can be installed on all computers with the Windows 95,
98, NT, 2000, ME or XP operating systems.
There are two ways to implement the installation of the NORD
CON software. The NORD CON software can either be installed
from the NORD PAC CD (Part. No.: 6099985) or downloaded
from the website >www.nord.com<.
NORD CON can communicate with up to 31 frequency inverters
simultaneously or via the device-specific RS485 interface.
The connection from PC to SK 300E is implemented via the
interface converter SK IC1-232/485 (Part. No. 276970020) and
the connection cable 300E (Part. No. 278910060).
As well as control and parameterisation of the frequency
inverter, operating values can also be displayed. The integrated
oscilloscope function is a helpful tool for optimising drive
systems. The resulting oscillograms – like the parameter data
sets - can be saved, edited and archived.
NOTE: Internet site for downloading the PC software NORD CON
>>>
HT
www.nord.com
TH
<<<
Features
• Creation, documentation and storage of frequency inverter parameter settings
• Control of the connected frequency inverters
• Monitoring of connected frequency inverters
• Oscilloscope
function
• Creation of macros for test process sequences
• Remote control of connected frequency inverters
Remote control
For commissioning (parameterisation), the known device displays are
simulated, enabling remote control of the frequency inverter in familiar
surroundings.
All possible frequency inverter operating unit functions can be carried out.
Simulation Controlbox