NORD Drivesystems BU0300 User Manual
Page 53
4.2 ParameterBox (Handheld variant)
BU 0300 EN
Subject to technical alterations
53
4.2
ParameterBox (Handheld variant)
(SK PAR-2H, Part. No. 278910100)
The SK PAR-2H ParameterBox is a compact control device
for direct connection to the SK 300E inverter. A suitable
connection cable with an M12 plug contact is already
included with the device. This means that the
ParameterBox can be directly connected to the SK 300E
without additional components.
Special connection cables are required for connection to
other NORDAC inverters or a PC/laptop, which are listed in
more detail in the ParameterBox instruction manual "BU
0040
".
Connection to SK 300E
Connection to the trio SK 300E can take place using the
existing M12 socket. The maximum protection class IP55 is
retained for the entire unit by using the special connector
components.
After the mains voltage is switched on the corresponding
device type is automatically recognised.
Note:
Further information can be found in the operating
instructions of the ParameterBox "BU 0040"
M12 connector, blue
Description
Cable
2 (wh)
+ 5V / 170mA
Length 3m
4 x 0.75mm²
1 (br)
GND
4 (b/w)
P+ (A) (RS485 +)
3 (bu)
P-(B) (RS485 -)