Triton X-SCALE/X2 Configuration Manual - Manual (Page 99)

8 9
S
YSTEM
P
ARAMETERS
S
ET
T
IME AND
D
ATE
The T IME and D ATE tabs let you adjust the terminals displayed Time and Date. The default settings are
standard for the country/region selected on the R EGION screen.
To change the T IME or D ATE settings:
1. From the R EGIONAL S ETTINGS P ROPERTIES screen, press the LEAR > key to activate the option tabs
at the top. Use the RROW > keys to select (highlight) the T IME (or D ATE ) tab.
2. Press the LEAR > key to move down through the available options. When an option is selected,
press the
RROW
> key repeatedly to scroll the available selections.
3. Press the NTER > key when all changes have been completed.
The default T
IME
setting is represented by hours, minutes, and seconds along with AM or PM as appli-
cable.
H OURS . It can be set as one (1) or two (2) digits (ie. 4 or 04), using either the 12 or 24-hour clock. (i.e.
4:00 in the afternoon can be displayed as 4:00:00 PM (with or without a preceding 0) or 16:00:00).
*NOTE*
In some cases, none of the standard settings may satisfy the requirements. A value can be manually entered
in the field by pressing the function key which will display an on-screen keyboard. Use the 8 (up),
0 (down), and the
RROW > keys to navigate around the keyboard. Press the NTER > key to make a
selection and save the value in the field.
T IME S EPARATOR . The colon (:) is the default time separator (i.e. 4:00 PM)
AM and PM symbols. Defaulted to AM and PM