Triton X-SCALE/X2 Configuration Manual - Manual (Page 266)

Triton Systems of Delaware, Inc. Page 11 of 13
November 9, 2006
Configurable Local IP Port
This release gives access to the IP port value for outgoing traffic to a host. The following is a
screen shot of the configuration of this new feature (accessible from Management =>
Diagnostics => Modem/Ethernet =>Configure Ethernet Settings).
The following is the dialog box that is used to configure the Outgoing Port address.
A setting of 0 allows the terminal to operate in a mode that is compatible with the 1.7.2 or prior
releases. Any other values will force the out going port address to equal this setting.