Triton X-SCALE/X2 Configuration Manual - Manual (Page 37)

2 7
D
IAGNOSTICS
C
URRENT
T
ERMINAL
E
RROR
/ E
RROR
H
ISTORY
A CCESS I NSTRUCTIONS :
1. From the T
ERMINAL
S
TATUS
screen, select the C
URRENT
T
ERMINAL
E
RROR
option by pressing <1> on
the keypad.
2. From the T
ERMINAL
S
TATUS
screen, select the T
ERMINAL
E
RROR
H
ISTORY
option by pressing <2> on
the keypad.
D
ESCRIPTION
:
The C URRENT T ERMINAL E RROR function displays a management report that shows the most current termi-
nal status/error code. The error code is listed with a short description of the condition.
The report is displayed in a management report dialog, which can be printed to the receipt printer or saved
to an external memory device.
The T ERMINAL E RROR H ISTORY function displays a management report showing all status/error codes that
have been recorded since the initial terminal setup. A short description of each code is provided. The
history of terminal status/error codes will not be cleared when the ‘Reset Terminal Error” function is used.
The report is displayed in a management report dialog, which can be printed to the receipt printer or saved
to an external memory device.