Triton X-SCALE/X2 Configuration Manual - Manual (Page 46)

3 6
X-S
CALE
/ X2 C
ONFIGURATION
M
ANUAL
F
ORCE
U
NLOCK
Cassette (NMD only)
A CCESS I NSTRUCTIONS :
1. From the D IAGNOSTICS screen, select the C ASH D ISPENSER option by pressing <1> on the keypad.
2. From the C ASH D ISPENSER screen, select the F ORCE U NLOCK C ASSETTE option by pressing <5> on the
keypad.
D ESCRIPTION :
The F
ORCE
U
NLOCK
C
ASSETTE
function provides a means of overriding the NMDs unlocking mechanism
associated with a specific cassette. It is only to be used immediately after failure of a normal cassette unlock
operation.
Occasionally, a condition may occur that prevents a cassette from being removed from the dispensing
mechanism. For example, a note that is lodged or jammed in a cassettes’s ‘gate’ could cause such a condi-
tion. The gate is a mechanical shutter on the feed end of a cassette which lowers to allow notes to be
dispensed and raises as a security precaution when the cassette is removed.
During a normal unlocking operation when the gate is closed, the cassette releases an associated mechani-
cal latch allowing the cassette to be removed from the body of the dispenser. If the gate does not fully close,
the cassette will not release the latch and remains locked in the mechanism.
If you find that a particular cassette can not be removed after performing a normal unlock operation, use this
function first to attempt releasing the applicable cassette from the mechanism.
Once the cassette has been removed from the dispenser, carefully remove any notes that are sticking out of
cassette. Insert the cassette into the dispenser and perform a normal ‘Lock’ operation followed by a normal
‘Unlock’ operation. You may now remove the cassette.