Triton X-SCALE/X2 Configuration Manual - Manual (Page 122)

112
X-S
CALE
/ X2 C
ONFIGURATION
M
ANUAL
2. M
AXIMUM
N
ON
-C
ASH
. This option sets the maximum non-cash purchase limit before any purchases
of non-cash items can be completed. This amount is the maximum allowed for non-cash items.
The amount entered must be an even multiple of the value of a single unit of non-cash purchases in the
cassette. The value is in dollar amounts only; no cents are allowed.
! Press <2> on the keypad. Enter the maximum amount value. Press when completed.
3. M
IX
M
ETHOD
(
DEFAULT
- M
INIMIZE
). This option allows selecting the pick method for dispensers that
employ multiple cassettes with the same denomination. The available selections are: M
INIMIZE
and
M
INIMIZE
EW (EvenWear).
! The current method (identified as “M
INIMIZE
” in the available selections) minimizes the number of bills
dispensed, and when more than one cassette has the same bill denomination, one cassette is depleted
before the other cassette is used. For example:
4-8. F
AST
C
ASH
. During a withdrawal transaction, fast cash options may be presented to enable the
customer to select amounts from a convenient list of options. The amounts do not have to be in set
order, though typically, they increase in value from top to bottom.
Enter values that are multiples of the notes loaded in the cassette(s).
! When “M
INIMIZE
EW” is selected , the terminal shall “rotate” which cassette with the same denomi-
nation is used, by transaction, because picking multiple notes from one cassette is quicker than picking the
same number of notes from multiple cassettes. After every restart, the terminal will start its rotation from the
same cassette. Examples:
A three (3) cassette cash dispenser has 1 cassette with $10 bills in cassette A and $20 bills in cassettes B and
C. A request for $150 dollars would be filled with 1 bill from cassette A and 7 bills from cassette B unless B
was out of money, in which case the bills would come from cassette C.
! Press <3> to toggle between Minimize or Minimize EW.
! Press <4> through <8> (individually) on the keypad. Enter the amounts and press
NTER
> for each
entry.
9. C
ASSETTE
P
ARAMETERS
. This option enables you to view/configure cassette(s) parameters such as
currency data, multiple amounts, etc. The following pages explain this option.
1 - Terminal 1 has two cassettes (A and B) with the same denomination. The first transaction after a terminal
restart will always use cassette A. The second will use cassette B and subsequent transaction will continue
to alternate between the two cassettes which cassette is used.
2 - Terminal 2 has four cassettes (A, B, C, and D) with the same denomination. The first transaction after a
terminal restart will always use cassette A; the second, cassette B, the third cassette C, the fourth cassette
D, and the fifth would restart the pattern at cassette A.