Triton X-SCALE/X2 Configuration Manual - Manual (Page 272)

Software Release Notes
Triton Systems Page 4 of 15 March 6, 2007
Description of Changes
Changing Default Passwords
A new ERROR code (246) has been created for when the terminal’s Master Password is in its
default state. The terminal will detect this condition and go out of service. On the out of service
screen no error information will be displayed. The following is a screen capture of this state.
This error code will not clear until the Master Password is changed from its default state.
** Note - Installing this version of software remotely using Triton Connect will cause the
terminal to go out of service if you have not changed the default password. This password can
only be changed remotely with Triton Connect version 4.3.8 or later.
TDM-1XX Mechanisms Configurations are reporting as TDM-2XX
This release corrects the problem of newer TDM firmware that responds to both command
protocols of the TDM product line. These command protocols affects the way that cassettes are
managed and error codes that are reported. This release will test for a single cassette TDM
before testing for a TDM multi-cassette mechanism. With this and future versions software,
when installing an update file over any prior software release on a terminal with a
TDM100 or TDM150 dispenser, the cassette multiple amount may need to be reconfigured
before the terminal will go into service **.