Triton X-SCALE/X2 Configuration Manual - Manual (Page 186)

B-6
X-S
CALE
/ X2 C
ONFIGURATION
M
ANUAL
366 Dispenser cassettes disabled
367 Dispenser communication error.
368 Dispenser cannot dispense the request
369 Dispenser device reset
370 Dispenser - EOT error
371 Dispenser com error header-trailer
372 Dispenser item value error
373 Dispenser machine not opened
374 Dispenser rejected check
375 Dispenser invalid request
376 Dispenser multiple device error
377 Dispenser device error
378 Dispenser cassette low
379 Dispenser unknown error code
380 Dispenser setup incomplete
381 Dispenser cassette invalid
382 Dispenser cassettes disabled (ALL)
383 Dispense cassettes low (ALL)
384 Dispenser cassettes empty (ALL)
385 Dispenser offline, no reject vault and no hoppers
386 Dispenser offline - no hoppers
387 Dispenser offline - error-validating configuration
388 Dispenser offline - NMD require Reject Vault and at least one
cassette
389 Dispenser offline. Detected offline error check op state
390 Dispenser offline - storing configuration
391 Dispenser sensor failure 2
392 Error in last dispense
393 Error in double detect 2
394 Purge failed upon power-up
395 Multiple cassette of the same type
396 Dispenser offline – found no reject bin
500 SPED Read Error
501 SPED invalid return record
502 SPED read type error
503 SPED invalid command
504 SPED invalid return ID
505 SPED device busy
506 SPED invalid request
507 SPED sequence error
508 SPED LRC error
509 SPED no data
510 SPED invalid message ID
511 SPED Data overflow
512 SPED device idle
513 SPED device offline
Error Code Description