Triton X-SCALE/X2 Configuration Manual - Manual (Page 224)

Software Release Notes
Triton Systems Page 4 of 13 March 19, 2007
Description of Changes
Changing Default Passwords
A new ERROR code (246) has been created for when the terminal’s Master Password is in its
default state. The terminal will detect this condition and go out of service. On the out of service
screen no error information will be displayed. The following is a screen capture of this state.
This error code will not clear until the Master Password is changed from its default state.
** Note - Installing this version of software remotely using Triton Connect will cause the
terminal to go out of service if you have not changed the default password. This password can
only be changed remotely with Triton Connect version 4.3.8 or later.