Triton X-SCALE/X2 Configuration Manual - Manual (Page 43)

3 3
D
IAGNOSTICS
C
ASH
D
ISPENSER
S
TATUS
A CCESS I NSTRUCTIONS :
1. From the D
IAGNOSTICS
screen, select the D
ISPENSER
option by pressing <4> on the keypad.
2. From the D ISPENSER screen, select the C ASH D ISPENSER S TATUS option by pressing <1> on the keypad.
D ESCRIPTION :
The C ASH D ISPENSER S TATUS report identifies the type of dis-
pensing mechanism installed and displays the results of the
most recent cash dispenser status check.
The report is displayed in a management report dialog that
can be printed to the receipt printer or saved to an external
memory device.
P
URGE
A CCESS I NSTRUCTIONS :
1. From the D IAGNOSTICS screen, select the D ISPENSER option by pressing <4> on the keypad.
2. From the D ISPENSER screen, select the P URGE option by pressing <2> on the keypad.
D ESCRIPTION :
The P URGE command instructs the dispenser to remove all documents from the feed path. When the purge
command is used to clear the feed path following a jam or failure of the dispenser, some or all of the notes
may pass out of the exit depending on their location in the feed path and the type of fault condition.
Once the purge command is completed, the user will be prompted to either repeat the purge operation or exit
and go back to the Dispenser menu.