Triton X-SCALE/X2 Configuration Manual - Manual (Page 47)

3 7
D
IAGNOSTICS
D
ISPENSER
T
OTALS
/ R
ESET
D
ISPENSER
D
ESCRIPTION
:
The D ISPENSER T OTALS function displays dispenser activ-
ity totals in various categories. Cumulative dispense and
reject counts for the dispenser as well as individual totals
for each installed cassette are provided.
The report is displayed in a management report dialog,
which can be printed to the receipt printer or saved to an
external memory device.
A CCESS I NSTRUCTIONS :
1. From the D
IAGNOSTICS
screen, select the C
ASH
D
ISPENSER
option by pressing <1> on the keypad.
2. From the C ASH D ISPENSER screen, select the D ISPENSER T OTALS option by pressing <6> on the
keypad.
3. From the C ASH D ISPENSER screen, select the R ESET D ISPENSER option by pressing <7> on the keypad.
The R ESET D ISPENSER function resets the operating parameters associated with the dispenser and its asso-
ciated cassette(s). This operation will generally be performed when a new dispenser is added or there is a
problem with the current dispenser.
Select NTER > to reset the dispenser or ANCEL > to exit without resetting the dispenser.
** C
AUTION
**
If you select this option, you will lose ALL cassette parameters (amount,value, etc) that have been
previously configured. This option resets the cassette parameters to the factory default settings.