Triton X-SCALE/X2 Configuration Manual - Manual (Page 82)

72
X-S
CALE
/ X2 C
ONFIGURATION
M
ANUAL
C
HANGE
U
SER
P
ASSWORD
/ U
SER
N
AME
A
CCESS
I
NSTRUCTIONS
:
1. From the P
ASSWORD
M
AINTENANCE
screen, select the C
HANGE
U
SER
P
ASSWORD
option by pressing <1>
on the keypad.
2. From the P
ASSWORD
M
AINTENANCE
screen, select the C
HANGE
U
SER
N
AME
option by pressing <2> on
the keypad.
D
ESCRIPTION
:
The C
HANGE
U
SER
P
ASSWORD
function allows the currently logged in user to change their password. To
change the password:
! Select <1> on the keypad. When prompted, enter the new password consisting of between 4-12
numeric digits. Press
NTER
>.
! You will be prompted to re-enter (confirm) the new password. Press
NTER
>.
NOTE: The terminal password consists of a 2-digit ID code and a Password of 4-12 digits. ‘00’ is the
Master ID code and cannot be changed. Only enter the password digits!
Example: If you enter ‘5566’, then the Master password will be changed to ‘005566’. If you enter
‘005566’, then the Master password will be changed to ‘00005566’.
The C
HANGE
U
SER
N
AME
function allows the currently logged
in user to change their user name. To change the user name:
! When prompted, enter a new user name. The new name
may consist of up to a maximum of 40 alphanumeric char-
acters.
! Press
NTER
> when completed.