Triton X-SCALE/X2 Configuration Manual - Manual (Page 152)

142
X-S
CALE
/ X2 C
ONFIGURATION
M
ANUAL
EMV C
ONFIGURATION
A
CCESS
I
NSTRUCTIONS
:
1. From the T
ERMINAL
C
ONFIGURATION
screen, select the M
ORE
O
PTIONS
option by pressing <0> on the
keypad.
2. From the M
ORE
O
PTIONS
screen, select EMV C
ONFIGURATION
option by pressing <5> on the keypad.
Note: This option active only if an EMV card reader is installed and software supports it.
D
ESCRIPTION
:
The EMV C
ONFIGURATION
option allows the terminal operator to perform the following functions:
1. EMV P
ROCESSING
. When this feature is enabled (checked), the
EMV card reader is activated.
! Press <1> to toggle between enabled (checked) or disabled
(unchecked). When enabled, option <2> will be activated.
2. EMV A
PPLICATION
S
ETTINGS
. Selecting this option lists all the of
the EMV AIDs that are loaded on the terminal. A checkmark
indicates if that AID is enabled..
Note: These next 4 options are in effect only if option (1) is
enabled (checked).
! Press <2> to bring up the AIDs list. Press the
RROW
> keys to
move through the options. Press the key to enable
(check) or disable (uncheck) the selected application. Press
NTER
> when completed.